FreedomEdge® Step-by-Step Training Video
Watch this 6-minute training video of a home sub-q infusion demonstration.
Wind large knob back black tab is at end of it’s track. Load prepared 20ml or 30ml syringe
Close top lid to start the infusion.
Check infusion using progress window.
Watch this 6-minute training video of a home sub-q infusion demonstration.
Made in the USA with highest level of quality control for defect-free product. No product maintenance needed.
Highly accurate constant pressure pump for safe delivery. Maintains pressure of 13.5 psi.
If pressure in sites increase, the system immediately responds by automatically slowing down.
Maximum simplicity for all users – small hands, limited dexterity & limited strength.
No controls – just load, close & go!
Easy to handle and purge of air. Can be filled from 1ml to 30ml.
Easy to check infusion progress.
Convenient and for patients – no unnecessary alarms & noise.
No batteries or electricity needed. Comes with a travel pouch to promote patient independence.
Write down the time the infusion started and verify that you are using the correct control rate tubing and syringe recommended by your healthcare provider. Then, watch that the syringe plunger moves in accordance with your infusion time. If you expect dose to take 1 hour, then after 15 minutes, 1/4 of your dose should be complete. If there is any doubt, please ask your healthcare provider.
Simply time your infusions! Note how long the first half of your dose takes, and then the second half. Compare the two times. If the second half takes longer, you may be able to find sites that accept the drug more easily. If the two times are just about equal, it usually means your sites are accepting the drug well, and the site pressure is not increasing over the duration of your infusion.
If a dose is larger than 30ml, you can load an additional syringe using the same tubing and needle set. For smaller volumes, the pump system automatically adjusts to whatever amount is contained in the syringe. We also offer the FREEDOM60® pump, which has the same performance as FreedomEdge®, but for 60ml syringes.
Speak with your healthcare provider to learn more about all of the Precision Flow Rate Tubing™ choices available, and to see if a change is appropriate.
Refer to the Instructions For Use for information on how to clean the FreedomEdge™.
Yes. It can be used in any position, at any altitude.
Yes. The FreedomEdge® can be used to administer most intravenous and subcutaneous medication that will fit in a 20ml or 30ml syringe.
The FreedomEdge® is designed to operate without scheduled maintenance. If you ever experience a pump problem, immediately advise your healthcare provider who can arrange for a replacement if necessary.
Yes. If you would like a pouch, please contact the provider who sent you your pump.
Study to Evaluate Patient-Centered Outcomes and Infusion Parameters Using the HIgH-Flo Super26 Needle Set Vs. Standard HIgH-Flo 26g Needle Set
Needle Membrane Puncture Mechanics – Vanderbilt University
Surprising Educational Discoveries When Creating Medical Devices with Clinicians and Users
Enabling self-treatment through a novel patient-driven fSCIg administration
Importance of ancillary supplies for SCIg infusions
Dry vs. Wet Priming Study by Diplomat
Clinicians Infusion Check List for Successful SCIg
Impact of Selected Sub-q Needle Sets
Secrets in Finding the Best Infusion Sites
Selecting the Right Infusion Device
Defining the Flow Rate
Needle Length – Swedish Study
Drug Leakage – Swedish Study
Use of a Portable Syringe Infusion System for Antibiotic Infusions
Impact of a Subcutaneous Infusion Set
Impact of Needle Sets on Patient Infusion Site Reactions
Patient Driven SCIg Administration
Patient IVIg to SCIg Case Study
Infusion Pump Design For SCIg
Enhancing Responsiveness through Stakeholder Feedback
No publications available at the moment.
We like to remain at the forefront of the industry and up-to-date with the latest innovations, developments, and training across our areas of care and the people we serve. So we regularly attend congresses, industry conferences, and other events. See where we will be next and come and meet the team so we can work together to empower patients.